Smoke Damper
The SD-181-SS smoke damper employs 304 stainless steel airfoil blades for point-of-origin control of smoke in static and dynamic smoke management systems. The SD-181-SS is qualified to 2,000 ft/min (10.16 m/s) and 4 in.wg. (1.0 kPa) and may be installed in, or adjacent to, vertical walls or partitions, or horizontally in, or adjacent to, floors or assemblies.
Frame: 5" x 1" (127 x 25) stainless steel hat channel with interlocking corner gusset. Equivalent to 13 ga. (2.4) channel frame. Low profile head and sill are used on sizes less than 13" (330) high.
Blades: 6" x 14 ga. (152 x 2.0) equivalent stainless steel - airfoil.
Side-Plate: 12" x 20 ga. (305 x 1.0) stainless steel.
Axles: 1/2" (13) diameter stainless steel hex.
Linkage: Concealed in frame.
Bearings: Stainless steel oilite, sleeve-type.
Seals: Silicone blade edge seals inegrally rolled and mechanicaly fastened to blades. Flexible metal jamb seals.
Actuator: 120 VAC, power-open, spring-close, external mount.
Minimum Size: 8" x 6" (203 x 152)
Type C: 6" × 4" (152 × 102)
Maximum Size: Single Section: 24" x 36" (610 x 914)
Type C: 22" × 34" (559 × 864)
Multiple Section: 96" x 72" (2439 x 1829) or
192" x 36" (4876 x 914)
NEED HELP?
We have a team of experts that can help you identify the right products to meet your goals. To speak with an expert about installation, product guide, product spec sheet contact your local C&S airproduct store or authorized distributor.
Find Your Local Representative