Model FD4D-OP

1-1/2 Hour - Dynamic Fire Damper
Out of Partition

The FD4D-OP fire damper employs curtain style blades for point-of-origin control of fire in dynamic HVAC systems. These specialty dampers are approved for installation with the closed plane of the curtain up to 2-1/2" (64) outside the fire rated partition and allow for direct service access from the face of the damper through the HVAC grille. The FD4D-OP is qualified to 4,000 ft/min (20.3 m/s) and 4 in.wg. (1.5 kPa) and may be installed in vertical walls or partitions, or horizontally in floors or assemblies with fire resistance ratings up to 2 hours.

Standard Construction

Frame: 22 ga. (0.85) galvanized steel.
Blades: 24 ga. (0.7) galvanized steel.
Sleeve: 14" x 18 ga. (406 x 1.3) galvanized steel with 3/4" (19) flange and factory installed thermal insulation on four sides.
Fire Closure Device: Fusible link.
Fire Closure Temperature: 165^oF (75^oC)
Minimum Size: 6" x 6" (102 x 102)
Maximum Size: 36" x 36" (914 x 914)

Ratings

UL 555 Fire Resistance Rating: 1-1/2 hour (vertical and horizontal)

UL 555 Listing: R14981
CSFM Listing: 3225-1404:101
New York City MEA Listing: 295-98-E
Meets NFPA Standards: 90A, 92A, 92B and 101
Meets Building Code Standards: IBC, NBC, NFPA, SBC and UBC